Home  /  Warehouse & industrial

Warehouse and industrial defit on the Sunshine Coast

Mezzanines, racking, offices within sheds, epoxy floors and the bolt holes left behind, across the Kunda Park, Caloundra West and Coolum industrial estates.

What an industrial defit removes

Sheds accumulate a different kind of fitout. Pallet racking bolted to the slab. Mezzanine floors. An office pod built inside the shed with its own aircon and lighting. Three-phase drops to machinery positions. Compressed air lines. Epoxy floor coatings. Bollards, guardrails and line marking. Sometimes a cool room or a spray booth.

Most of it is bolted or chemically anchored to the slab, which means the defit is as much about the holes as the items. A slab with two hundred cut-off anchor bolts is not made good.

The racking comes out in a day. Grinding the anchors flush and filling the holes is the part that takes the rest of the week.
Large industrial warehouse with a mezzanine office being dismantled, steel framing stacked and an epoxy floor showing outlines where racking stood
Racking footprint still visible on the epoxy. Every one of those marks is a bolt hole

The elements

  • Racking and shelving. Unbolted, dismantled and removed. Often resold or recycled as steel.
  • Mezzanines. Structural steel, decking, stairs and balustrades. Larger mezzanines may have needed building approval to install and their removal should be checked against that.
  • Internal offices. Framed rooms inside the shed, with their own ceilings, aircon, lighting and data. A small office defit inside a large shed.
  • Services. Three-phase drops, sub-boards, compressed air, extraction. All isolated and capped by licensed trades.
  • Floor. Anchor bolts ground flush, holes filled, epoxy coating removed or repaired as the lease requires, line marking removed.
  • External. Signage, bollards, bin enclosures, hardstand items.

Slab repair

Industrial leases are increasingly specific about the slab. Anchor bolts cut flush and holes epoxy-filled is the usual minimum. Some require the surface ground and recoated where racking sat. Some ask for the floor returned to the original coating, which can mean recoating the whole footprint.

It is worth photographing the slab before any racking goes in, because floor damage from forklift traffic is the item landlords most often try to include in a tenant's make good, and a dated photo is the only defence.

Mezzanine approvals

A mezzanine of any size usually needed building approval to install. Removing it is generally simpler, but where the mezzanine was part of an approved fire strategy for the building, or where it carried services, the removal may need a certifier's involvement. Worth raising with the landlord before assuming it is straightforward.

Access and timing

Industrial estates are the easiest access on the Coast: roller doors, hardstand, no lifts. The constraints are neighbouring tenancies and the estate's hours. A shed defit with racking, a mezzanine and an internal office is typically one to two weeks including slab repair.

Written September 2026

Check your lease and the current law before you rely on this

This page describes Queensland commercial lease obligations and defit practice in general terms as they stood in September 2026. The law changes, leases differ, and what applies to you is in your lease.

The statutory position is in the Property Law Act 2023 and, for retail premises, the Retail Shop Leases Act 1994, both at legislation.qld.gov.au. The Queensland Small Business Commissioner publishes a make-good factsheet and offers mediation. Business Queensland covers ending a lease. Building work licensing sits with the Queensland Building and Construction Commission. Where anything here differs from those sources or from your lease, they are right and we are not.

We are not lawyers, property managers or certifiers. For what your lease requires and whether it can be negotiated, get legal advice.

Accurate at the time of writing, September 2026. Always check the source before relying on it.

Questions

Common questions

What happens to the racking?

Unbolted, dismantled and removed. Good condition racking has resale value and the rest is recycled as steel. Either way the anchors in the slab are the real job.

What does slab make good involve?

At minimum, anchor bolts ground flush and holes epoxy-filled. Some leases require grinding and recoating where racking sat, or returning the floor to its original coating.

Do we need approval to remove a mezzanine?

Removal is usually simpler than installation, but if the mezzanine was part of the building's approved fire strategy or carried services, a certifier may need to be involved. Check with the landlord.

Can forklift damage be included in our make good?

Landlords often try. Fair wear and tear is usually excluded, but the boundary is arguable. A dated photo of the slab from lease start is the only real defence.

Who removes the three-phase and sub-boards?

A licensed electrician, before any demolition. Compressed air and extraction are isolated by the relevant trades. It is a named item on the quote.

How long does a shed defit take?

Racking, a mezzanine and an internal office is typically one to two weeks including slab repair. Access is usually easy, so the constraint is the work itself.

What about line marking on the floor?

Removed if the lease requires, usually by grinding. Painted-over line marking shows through and does not count.

Is there asbestos risk in sheds?

In older sheds, particularly pre-1990 with fibro cladding or older office pods, yes. Raise it early. Disturbing it requires a licensed removalist and clearance.

Next step

Send the tenancy and the date

Address, rough size, what is in there, and when the lease ends. That is usually enough for a price without anyone visiting.

Scroll to Top