Home  /  Defit vs make good

Defit vs make good on the Sunshine Coast

Two terms that get used interchangeably and are not the same thing. One is the work. The other is the obligation.

The short version

A defit is the physical strip out. Partitions, joinery, floors, signage and services removed from a tenancy.

A make good is the lease obligation to hand the premises back in a specified condition. It usually requires a defit, and then repairs, painting and reinstatement on top.

You can do a defit without meeting your make good. You almost never meet your make good without a defit.

The defit is what the contractor does. The make good is what the landlord signs off. They are only the same thing if the work is finished.

Where the words come from

"Defit" is trade language, the reverse of fitout. It describes a task. Contractors quote defits, and a defit quote is a demolition scope.

"Make good" is lease language. It appears in the clause that says what the tenant must do at the end of the term. In Queensland it is also the term the Property Law Act 2023 and the Small Business Commissioner use. A make-good obligation is a legal thing, and it is discharged when the landlord agrees it has been.

The confusion is that tenants google "defit" when what they need is a make good, and contractors sell "defits" that leave the make good unfinished.

What a defit-only quote leaves out

  • Patching the walls where partitions were fixed
  • Painting to a uniform base building finish
  • Replacing damaged ceiling tiles and straightening the grid
  • Reinstating base building doors, lighting and skirting
  • New floor coverings where the lease requires them
  • Service certificates from licensed trades
  • The builders clean and the photographs
  • The walk-through and the handover

A landlord's agent inspecting a stripped-out tenancy with fifty fixing holes and no paint does not release the bond. That is a defit. It is not a make good.

Commercial wall being made good with filled and sanded patches where partitions were fixed and a fresh coat of white paint half applied
This is the make good. Everything before it was the defit

Strip out, reinstatement and the rest

Other terms turn up: "strip out" is the same as defit, "reinstatement" is putting base building elements back, "handback" is the moment the keys go over. A full make-good job runs defit, then reinstatement, then handback.

Which one to ask for

Ask for a make good, quoted to the lease clause. That forces the contractor to price the whole job to the standard the landlord will inspect against. If you ask for a defit, you get a defit, and then you find out what is missing on inspection day.

Written September 2026

Check your lease and the current law before you rely on this

This page describes Queensland commercial lease obligations and defit practice in general terms as they stood in September 2026. The law changes, leases differ, and what applies to you is in your lease.

The statutory position is in the Property Law Act 2023 and, for retail premises, the Retail Shop Leases Act 1994, both at legislation.qld.gov.au. The Queensland Small Business Commissioner publishes a make-good factsheet and offers mediation. Business Queensland covers ending a lease. Building work licensing sits with the Queensland Building and Construction Commission. Where anything here differs from those sources or from your lease, they are right and we are not.

We are not lawyers, property managers or certifiers. For what your lease requires and whether it can be negotiated, get legal advice.

Accurate at the time of writing, September 2026. Always check the source before relying on it.

Questions

Common questions

Is a defit the same as a make good?

No. A defit is the strip out. A make good is the lease obligation to hand back in a specified condition, which needs the defit plus repairs, painting and reinstatement.

Why do contractors say defit?

Because it is trade language for the reverse of a fitout, and it describes the demolition scope. A defit quote is not necessarily a make-good quote.

What does a defit quote usually leave out?

Patching, painting, ceiling tile replacement, reinstatement of base building items, service certificates, cleaning and the handover. Everything the agent inspects.

What is reinstatement?

Putting base building elements back that the tenant removed or replaced: original doors, lighting, sometimes carpet. Part of the make good on original condition leases.

What is strip out?

Another word for defit. Same meaning.

Which one should I ask a contractor for?

A make good, quoted to your lease clause. That prices the job to the standard the landlord will inspect against.

Can I do the defit myself and get someone for the make good?

The demolition part, sometimes, but services must be capped by licensed trades and the make good is builder and painter work. Most tenants use one contractor for both.

When is the make good actually done?

When the landlord or agent inspects and agrees it meets the lease standard, and the bond is released. Not when the last skip leaves.

Next step

Send the tenancy and the date

Address, rough size, what is in there, and when the lease ends. That is usually enough for a price without anyone visiting.

Scroll to Top