Home  /  Hospitality fitout removal

Hospitality fitout removal on the Sunshine Coast

Cafes, restaurants and bars: counters, kitchens, exhaust, cool rooms and the plumbing behind all of it, in the market segment that turns over fastest.

The densest fitout there is

A hospitality tenancy carries more services per square metre than anything else on the Coast. Commercial kitchen with exhaust canopy and ductwork, grease trap, gas, three-phase, multiple water points, floor wastes, cool room, bar with beer lines and refrigeration, coffee machine plumbing, dishwasher, and a front-of-house fitout on top.

Stripping it is a coordination job across four or five licensed trades before the demolition crew touches anything, and it is the defit most likely to run over if that coordination is not done properly.

A cafe strip out is mostly plumbers, electricians and a gas fitter. The demolition is the easy part.
Former cafe tenancy with the counter and back bar removed, plumbing capped at the wall, tiled splashback partly stripped and the exhaust canopy still hanging
Counter gone, services capped, canopy still to come down

What comes out and who does it

  • Gas. Isolated and capped at the meter or the tenancy boundary by a licensed gas fitter, with the appliances disconnected first.
  • Plumbing. Every water point, waste and floor drain capped by a licensed plumber. Grease trap pumped, cleaned and either removed or left as the lease requires.
  • Electrical. Three-phase to cooking equipment, cool room circuits, bar refrigeration and the sub-board, all isolated by a licensed electrician.
  • Exhaust. Canopy, ductwork and rooftop fan removed, and the roof penetration made weatherproof. Often the largest single item.
  • Cool room. Panels dismantled, refrigeration degassed by a licensed refrigeration technician before removal.
  • Bar and counters. Joinery, beer lines, glass washers, refrigeration.
  • Front of house. Seating, feature walls, bulkheads, lighting, flooring, signage.

The exhaust and the roof

Removing a kitchen exhaust leaves a hole in the roof. That penetration has to be closed and weatherproofed properly, and on a strata or centre roof it needs to be done to the building's standard. It is one of the items most commonly missed in a cheap quote and most commonly raised at inspection.

Some landlords want the exhaust left in place because the next tenant is also hospitality. That has to be agreed in writing, and if it is left, it should be left clean.

Grease traps

A grease trap is a council trade waste asset as well as a fitout item. Before removal it needs to be pumped out and cleaned by a licensed waste contractor, and the trade waste approval with Unitywater may need to be closed off. Check what the lease and the landlord require, because some prefer it left for the next food tenant.

Turnover on the Coast

Hospitality tenancies through Mooloolaba, Noosa, Caloundra and Maroochydore change hands faster than any other kind. That cuts both ways. Landlords often have a food tenant lined up who wants parts of the fitout kept, which can reduce the defit. But it also means the handover date is fixed and there is a queue.

Written September 2026

Check your lease and the current law before you rely on this

This page describes Queensland commercial lease obligations and defit practice in general terms as they stood in September 2026. The law changes, leases differ, and what applies to you is in your lease.

The statutory position is in the Property Law Act 2023 and, for retail premises, the Retail Shop Leases Act 1994, both at legislation.qld.gov.au. The Queensland Small Business Commissioner publishes a make-good factsheet and offers mediation. Business Queensland covers ending a lease. Building work licensing sits with the Queensland Building and Construction Commission. Where anything here differs from those sources or from your lease, they are right and we are not.

We are not lawyers, property managers or certifiers. For what your lease requires and whether it can be negotiated, get legal advice.

Accurate at the time of writing, September 2026. Always check the source before relying on it.

Questions

Common questions

Why are hospitality defits more expensive?

Services density. Gas, plumbing, three-phase, refrigeration and exhaust all need licensed trades before demolition starts. Four or five trades on a small tenancy is normal.

Does the exhaust have to come out?

Usually, unless the landlord agrees in writing to keep it for the next food tenant. If it comes out, the roof penetration has to be closed and weatherproofed to the building's standard.

What about the grease trap?

It needs pumping and cleaning by a licensed waste contractor before removal, and the trade waste approval may need closing off. Some landlords prefer it left for the next tenant. Check first.

Who disconnects the gas?

A licensed gas fitter, after the appliances are disconnected. It is capped at the meter or the tenancy boundary and certified.

Can the cool room be removed by the demolition crew?

The panels, yes. The refrigeration has to be degassed by a licensed technician first. Releasing refrigerant is illegal and the crew should not touch it.

How long does a cafe strip out take?

One to two weeks for a full strip to shell, most of it trades. A larger restaurant with a full kitchen can run longer. Add a week for inspection.

Can we sell the equipment?

Often, and it is worth doing before the defit. Commercial kitchen equipment, cool rooms and bar fittings have a resale market, and what is sold does not have to be removed as waste.

The landlord wants the kitchen left. Is that a problem?

No, if it is in writing. A partial defit that leaves the kitchen for the next tenant is common on the Coast. Get the scope documented so the make-good obligation is clearly met.

Next step

Send the tenancy and the date

Address, rough size, what is in there, and when the lease ends. That is usually enough for a price without anyone visiting.

Scroll to Top