Home  /  Signage removal

Signage removal on the Sunshine Coast

Fascia, pylon, window and internal signage removed and the surface behind made good, because the unfaded rectangle is the first thing an agent sees.

Signage is fitout, and it is visible

Every sign the tenant installed comes out under a standard make-good clause: fascia signs, pylon panels, window vinyl, door lettering, internal directional signs, illuminated signs and the wiring to them. The removal is usually simple. The make good behind it is not, because Queensland sun leaves an unfaded rectangle on a rendered fascia that is visible from the car park.

The sign comes down in an hour. The ghost of it on the render is what the landlord photographs.
Exterior of a commercial shopfront with the fascia sign removed leaving clean unfaded rectangles and fixing holes on the render, with an extension ladder against the wall
Sign gone. Rectangle and fixing holes remain. Both get made good

Types and what each involves

  • Fascia signs. Fixed to the building fascia with anchors. Removed, fixings pulled or cut, holes filled, and the fascia repainted, usually the full fascia because a patch shows.
  • Illuminated signs. Electrician isolates and removes the supply first. Sign box removed, wiring made safe, penetration sealed.
  • Pylon signs. Tenant's panel removed from the shared pylon, blank panel fitted if the landlord requires, and the pylon's lighting left working.
  • Window graphics and vinyl. Removed with heat and solvent, adhesive residue cleaned off. Old vinyl on Coast glass bakes on and takes time.
  • Internal signage. Directional, reception and door signs removed, fixings filled, painted.
  • Awning and under-awning signs. Removed, awning soffit made good.

Shopping centres

Centres have signage specifications and usually require the tenant's fascia sign removed and the fascia returned to the centre's standard finish. Some centres do this themselves and recharge it. Check the centre's handback specification.

Council signage permits

Larger external signs on the Coast often needed a council permit to install. Removing them generally does not, but where a sign was subject to a specific approval condition, or where it was a structure in its own right, the landlord may want the approval closed off. Worth a question rather than an assumption.

The make good

Filling and painting the fascia to a uniform finish is the real work. On rendered fascias, the whole visible face is usually repainted in the base building colour because a patch of new paint next to five years of faded paint looks worse than the rectangle did. On aluminium composite fascias, panels may need replacing.

Written September 2026

Check your lease and the current law before you rely on this

This page describes Queensland commercial lease obligations and defit practice in general terms as they stood in September 2026. The law changes, leases differ, and what applies to you is in your lease.

The statutory position is in the Property Law Act 2023 and, for retail premises, the Retail Shop Leases Act 1994, both at legislation.qld.gov.au. The Queensland Small Business Commissioner publishes a make-good factsheet and offers mediation. Business Queensland covers ending a lease. Building work licensing sits with the Queensland Building and Construction Commission. Where anything here differs from those sources or from your lease, they are right and we are not.

We are not lawyers, property managers or certifiers. For what your lease requires and whether it can be negotiated, get legal advice.

Accurate at the time of writing, September 2026. Always check the source before relying on it.

Questions

Common questions

Does signage really need removing?

Under a standard make-good clause, yes. Tenant signage is fitout. The landlord or centre will want the fascia returned to the building's standard.

What about the pylon sign?

Your panel comes off the shared pylon and a blank is fitted if the landlord requires. The pylon itself and its lighting are base building and stay.

Who disconnects an illuminated sign?

A licensed electrician isolates and removes the supply before the sign box comes down. The wiring is made safe and the penetration sealed.

Why repaint the whole fascia?

Because a patch of new paint beside years of sun-faded paint shows more than the rectangle did. Full fascia repaint in the base building colour is what gets signed off.

Is window vinyl hard to remove?

On Coast glass it bakes on. Removal is heat and solvent and it takes longer than people expect. The adhesive residue has to come off too.

Do we need a council permit to remove a sign?

Generally not. If the sign was subject to a specific approval condition or was a structure in its own right, the landlord may want the approval closed off. Ask.

Can the centre remove our signage for us?

Some centres do and recharge the cost. Check the centre's handback specification. Doing it yourself is usually cheaper if it is allowed.

What if the fascia is aluminium composite?

Panels with fixing holes may need replacing rather than filling. It depends on the material and the landlord's standard.

Next step

Send the tenancy and the date

Address, rough size, what is in there, and when the lease ends. That is usually enough for a price without anyone visiting.

Scroll to Top