Three standards, three jobs
Make-good clauses in Queensland commercial leases set one of roughly three standards. The words vary between leases, but the work falls into these patterns, and knowing which one your lease sets is the first thing to establish.
| Standard | What it means on site | Typical scale |
|---|---|---|
| Remove fitout, make good damage | Tenant additions out. Base building left. Damage from removal repaired and painted. Floors usually stay. | Days |
| Original condition | Back to whatever the condition report shows at lease start. May mean reinstating previous finishes. Fair wear and tear excepted. | Days to weeks |
| Cold shell or base building | Everything out. Slab, ceiling grid or open slab, base services only. Floors, ceilings, lighting sometimes all removed. | Weeks |
Remove fitout and make good
The most common and the lightest. The tenant takes out what they added and repairs the damage doing so. Base building finishes stay: the grid ceiling, the base lighting, often the carpet. This is what most office leases mean, and it is a few days of work plus repairs.
Original condition
The premises go back to how they were when the lease started. That is precise if a condition report with photographs exists from that date. It is a negotiation if it does not.
The trap is that original condition can mean reinstating things: if the tenant replaced the landlord's carpet with timber, original condition means carpet goes back. If they removed a base building wall, it may need rebuilding. Read the condition report, not just the clause.
Fair wear and tear is excluded from every version of this. Ten years of sun through a Mooloolaba window fading the paint is not the tenant's to fix.
Cold shell and base building
The heaviest. Everything the tenant added and often things the tenant inherited: floor coverings to slab, suspended ceilings out, tenant lighting out, services capped back to the riser. Common in newer Coast strata suites where the landlord originally leased a bare concrete shell, and in shopping centres with a defined handback specification.
"Warm shell" sits between: base ceiling, lighting and air conditioning stay, everything else goes. The words are not standardised, so the lease and the landlord's specification decide.

Why it matters on the Coast
A lot of Sunshine Coast commercial space was built in the 2000s and leased as bare shells. Tenants fitted them out, and the leases say cold shell. Tenants who assume "make good" means a repaint get a surprise at the end. Ask the property manager which standard applies before you plan anything.
Negotiating the standard
The standard is set at lease signing, and that is when to negotiate it: a cap on make-good cost, a fixed scope, or a clause allowing a cash settlement. At the end of the lease there is less leverage, but landlords with a new tenant who wants the fitout will often agree to a partial defit. It has to be in writing.
Check your lease and the current law before you rely on this
This page describes Queensland commercial lease obligations and defit practice in general terms as they stood in September 2026. The law changes, leases differ, and what applies to you is in your lease.
The statutory position is in the Property Law Act 2023 and, for retail premises, the Retail Shop Leases Act 1994, both at legislation.qld.gov.au. The Queensland Small Business Commissioner publishes a make-good factsheet and offers mediation. Business Queensland covers ending a lease. Building work licensing sits with the Queensland Building and Construction Commission. Where anything here differs from those sources or from your lease, they are right and we are not.
We are not lawyers, property managers or certifiers. For what your lease requires and whether it can be negotiated, get legal advice.
Accurate at the time of writing, September 2026. Always check the source before relying on it.