Home  /  Make-good repairs

Make-good repairs on the Sunshine Coast

Patching, painting, ceiling tiles, skirting and reinstatement once the strip out is done. The part that turns a demolition into a handover.

The strip out is not the make good

A tenancy with the partitions gone, the joinery out and the floor lifted is not handed back. It is a construction site. The make good is what happens next: every hole where a partition was fixed patched and sanded, walls painted to a consistent finish, ceiling tiles that were cut or stained replaced, skirting reinstated, floors cleaned to slab or recarpeted if the lease requires, and the whole thing left as a space a landlord can show the next tenant.

This is the part cheap quotes leave out, and it is the part the agent inspects.

Nobody fails an inspection because the partitions are still there. They fail because of the fifty patches where the partitions were.
Commercial wall being made good with filled and sanded patches where partitions were fixed and a fresh coat of white paint half applied
Patched, sanded, painting. This is what the agent walks in to see

What make good usually covers

  • Wall repairs. Fixing holes, partition tracks, screw holes, sign fixings, cable penetrations. Filled, sanded, sealed.
  • Painting. To a uniform finish, usually the base building colour, usually whole walls rather than patch-painting because patches show.
  • Ceilings. Damaged, cut or stained tiles replaced. Grid straightened where partitions were fixed to it. Bulkhead removal made good.
  • Floors. Adhesive removed, slab cleaned, or new carpet or vinyl laid if the lease requires.
  • Skirting and trims. Reinstated where removed with the fitout.
  • Doors and hardware. Base building doors reinstated, tenant locks removed and landlord keys returned.
  • Lighting. Base building lighting reinstated where feature lighting replaced it. Tubes and fittings working.
  • Cleaning. Builders clean including windows, so the space presents.

To what standard

The lease sets it, and the words matter. "Good and tenantable repair" is the general Queensland standard. "Original condition" means the condition report. "Base building standard" means the landlord's specification. Some leases go further and require new carpet, new paint throughout and new ceiling tiles regardless of condition.

The one thing every standard excludes is fair wear and tear. Faded paint from ten years of sun through a Coast window is not the tenant's to fix. Fifty fixing holes are.

Painting properly

Patch-painting shows. A wall with twenty fresh patches of a slightly different white looks worse than an untouched wall, and it is the most common reason an agent asks for a repaint. Make good painting is usually full walls, sometimes full rooms, in the base building colour, with the correct sheen. It costs more than touching up and it is what gets signed off.

Sequence with the strip out

Repairs happen after demolition and before the clean, and they need the trades to have finished first. A wall patched before the electrician has pulled the last cable will be patched twice. Good programming has the make good starting as the last of the strip out finishes, not after.

Written September 2026

Check your lease and the current law before you rely on this

This page describes Queensland commercial lease obligations and defit practice in general terms as they stood in September 2026. The law changes, leases differ, and what applies to you is in your lease.

The statutory position is in the Property Law Act 2023 and, for retail premises, the Retail Shop Leases Act 1994, both at legislation.qld.gov.au. The Queensland Small Business Commissioner publishes a make-good factsheet and offers mediation. Business Queensland covers ending a lease. Building work licensing sits with the Queensland Building and Construction Commission. Where anything here differs from those sources or from your lease, they are right and we are not.

We are not lawyers, property managers or certifiers. For what your lease requires and whether it can be negotiated, get legal advice.

Accurate at the time of writing, September 2026. Always check the source before relying on it.

Questions

Common questions

Is make good the same as a defit?

No. The defit is the strip out. The make good is the repair and reinstatement that follows, to the standard the lease specifies. A cheap quote often covers the first and not the second.

Do we have to repaint the whole tenancy?

Often, in practice. Patch-painting shows and agents ask for full walls. Some leases explicitly require a full repaint regardless of condition.

What counts as fair wear and tear?

Deterioration from normal use over the lease: faded paint, worn carpet in traffic areas, minor scuffs. It is excluded from make good. Damage from the fitout, such as fixing holes and cut ceiling tiles, is not wear and tear.

Do ceiling tiles need replacing?

Any that were cut, stained or damaged during the fitout, yes. Some leases require all tiles replaced. Base grid straightened where partitions were fixed to it.

Does the landlord specify the paint colour?

Usually the base building colour, and often a specific product and sheen. Ask the property manager for the building specification before painting starts.

What if the lease says new carpet?

Then new carpet is part of the make good, at the tenant's cost, typically to the base building specification. It is one of the more expensive clauses and worth checking for early.

Who does the make good, the demolition crew or a builder?

Repairs and painting are builder and painter work. A contractor who offers defit and make good together coordinates both. Ask whether the quote includes the repair standard or just removal.

How do we prove the make good was done?

Photographs at every stage, then a walk-through with the agent and a signed handover. Keep the photos with the lease records until the bond is released.

Next step

Send the tenancy and the date

Address, rough size, what is in there, and when the lease ends. That is usually enough for a price without anyone visiting.

Scroll to Top